[Johor] Pelbagai Jawatan

Celestica Electronics (M) Sdn Bhd

At Celestica, we’re dedicated to understanding the challenges our customers face. Our talented global team responds to these challenges with innovative technology and manufacturing solutions for the world’s leading electronics companies.

From design and assembly, through to fulfillment and end-of-life services, we deliver end-to-end product lifecycle solutions that drive our customers’ success in the markets they serve.

Powder Coat Supervisor
(Senai)

Responsibilities:

  • To prepare, powder coat paint, and inspect finished metal products to meet customer specifications, production schedules, and recognized industry standards
  • To set up powder coat system for the day’s activities
  • To maintain powder coat equipment and quality of powder finish and wash
  • To maintain a clean work area continuously – 5S training
  • To check for quality of surface finish and welds prior to painting
  • To identify quality problems in gloss, evenness of finish and color
  • To evaluate results using equipment to include: mill thickness instruments, gloss meters, cross hatch testing, spectrophotometer, etc.
  • To store powder properly according to manufacturer’s specifications
  • To deliver parts to and from powder coat line with forklift
  • To support workflow by locating parts, preparing material and parts, and moving parts

Requirements:

  • Degree in Metallurgical/Chemical Engineering
  • 2-4 years experience in powder coating (wet paint experience will be considered)
  • Experienced with all aspects of powder coating and part preparation
  • Must have visual acuity and color vision to see quality and finish defects (gloss, etc.)
  • Be able to read, analyze, and interpret specific work instructions, quality documents, safety instructions, and general business documents in English
  • Cooperative, willing to share knowledge, cross-train, take on additional responsibilities
  • Work harmoniously with individuals or in a team environment to promote, establish, and implement teamwork to meet or exceed customer satisfaction

Permohonan melalui http://tinyurl.com/8kuzkne

HR Assistant – Temp 6 mths
(Senai)

Responsibilities:

  • To assist in control, keep track and prepare report of medical expenses and others
  • To provide administration support in all administration spectrum including foreign workers, purchasing of office supplies/stationeries and others.
  • To ensure proper documentation, arrangement, correspondences, report, filing and records are consistent with office guidelines and procedures
  • To assist in the day-to day running of the HR & Administration department and to perform other ad-hoc task pertaining to HR & Administration department as and when required

Requirements:

  • Diploma/Certificate in Human Resource Management , Business Administration or equivalent.
  • At least 3 years of working experience in the related field, preferably in manufacturing industry
  • Computer literate, MS Word and MS Excel
  • Strong interpersonal skills, result oriented, responsible, proactive and able to work independently
  • Ability to communicate effectively, both verbally and in writing
  • Fresh graduates/Entry level applicants are encouraged to apply
  • Willing to work extra hours when needed and able to travel domestically
  • Candidate able to start work immediately is an added advantage

Permohonan melalui http://adf.ly/DPsJn

Supplier Development Engineer
(Senai)

Responsibilities:

  • To teams with Strategic Supply Chain/ Mechanical Commodity/Supplier Development management to develop, align and implement strategic plans in support of region specific Supply Chain strategy
  • To participates in and oversees the development and qualification of Mechanical commodity suppliers and related Surface treatment/ Paint/Special Processes
  • To participates in the Supplier Selection and Assessment process – includes primary focus on the technical aspects of a supplier’s capabilities
  • To creates and fosters relationships with suppliers’ technical staff and executive management teams
  • To participate on quoting and costing initiatives
  • To apply systematic program management approach across all supply base development activities and ensure supplier creates project plans and manage for all major development/ transition efforts

Requirements:

  • Degree in Mechanical/Mechatronics/ Metallurgical /Electromechanical Engineering and Metal Fabrication/Welding
  • 4-6 years experience in a Machining/ Welding/ Frames Fabrication/ Sheet Metal/ Surface treatment/Paint operations (in metal forming and post form process and multiple disciplines supporting large industrial, semiconductor equipment, oil and gas, aerospace)
  • Advanced knowledge of Mechanical commodities; clear understanding of detailed technical drawings GD&T and specifications
  • Strong interpersonal, communication, presentation and negotiation skills and ability to work directly with demanding customers
  • Familiar with low volume high mix sourcing and operations
  • Possess Six Sigma Green Belt certification and Lean Manufacturing experience will be an added advantage

Permohonan melalui http://adf.ly/DPsNy

Supplier Mechanical Engineer
(Senai)

Responsibilities:

  • To analyze and manage the performance of assigned suppliers
  • To communicates directly with purchasing, engineering, and manufacturing regarding supplier capabilities / limitations, improvement projects, and qualification efforts
  • To evaluates suppliers’ manufacturing processes, recommends changes, and implements changes
  • To pariticipates in supplier audits and may lead audits
  • To monitors the cost, schedule, and performance factors of major suppliers
  • To develops sources of supply for assigned commodities at the direction of the Mechanical Supplier Manager
  • To guides suppliers using Best Known Methods (BKM) for fabrication resulting in reduced fabrication time, increased through-put, increased repeatability, reduced defect rate, and conformance to specification
  • Escalates to Supplier Manager if supplier performance is trending in a direction that might cause change in supplier status
  • To evaluates, recommends, and develops alternate sources to ensure the smooth flow of material to support production requirements
  • To identify and pursue cost reduction opportunities to support purchasing productivity objectives
  • To maintain departmental metrics to monitor the effectiveness of assigned responsibilities
  • Manages specific assignments within the assigned commodity area with responsibility for improving quality, cost, availability, Time to Volume, and service
  • To identifies opportunities for commodity complexity reduction and escalates/makes recommendations for improvement of operational efficiency

Requirements:

  • Degree in Mechanical/Mechatronics/ Metallurgical /Electromechanical Engineering and Metal Fabrication/Welding
  • 4-6 years experience in a mechanical trade – machining, sheet metal fabrication, welding, etc. or equivilent combination of education and experience (including program/project management, preferably in support of a high technology manufacturing environment, with significant exposure to Purchasing contracts and supplier negotiations)
  • Posses core competency in the multiple aspects of the commodity (e.g. Machining, Sheet Metal, Precision Frame Weldments, Fixturing, Tooling, Secodary Metal Processing – Powdercoating, Zinc Plating, Anodization, Electropolishing, etc.) and progressive Quality Management Practice
  • Proficient in MS/ Office applications
  • Strong technical aptitude in machining and sheet metal fabrication techniques and processes
  • Strong organizational and interpersonal skills
  • Six Sigma Certification is an added advantage

Permohonan melalui http://adf.ly/DPsQG

Supplier Development Manager
(Senai Johor)

Responsibilities:

  • Teams with Strategic Supply Chain/ Mechanical Commodity mgmt/ Supplier Development management to develop, align and implement strategic plans in support of region specific Supply Chain strategy.
  • Participates in and oversees the development and qualification of Mechanical commodity suppliers and related Surface treatment/ Paint/ Special Processes
  • Participates in the supplier selection, assessment process and defines development gaps and participates in closure/ improvements.
  • Manages development gap closure to support Company objectives for specific customers and delivery, lead time, quality and cost.
  • To ensure quality requirements are met and participate in development and approval of Process Control Plans
  • To participate on quoting and costing initiatives
  • Apply systematic program management approach across all supply base development activities
  • Champion strong supplier management partnership at various levels to ensure a long term collaborative relationship with a proactive focus

Requirements:

  • Degree in Mechanical/Mechatronics/ Metallurgical /Electromechanical Engineering and Metal Fabrication/Welding
  • Minimum 8 years work experience in sourcing, supply chain mgmt, supplier development & 5 years experience in machining/sheet metal fabrication techniques and processes
  • Hands on experience in Machine/ Fabrication shops
  • Advanced knowledge of Mechanical commodities; clear understanding of detailed technical drawings ; GD&T and specifications;
  • Fluency in English (written & verbal)
  • Strong interpersonal , communication , presentation and negotiation skills; ability to work directly with demanding customers
  • Strong problem solving skills
  • Proficiency in MS Office, Excel, Access & PowerPoint
  • Familiar with low volume high mix sourcing and operations
  • Six Sigma Green Belt or higher certification
  • Lean Manufacturing experience

Permohonan melalui http://adf.ly/DPsSY

Supplier Quality Engineer
(Johor – Senai)

Responsibilities:

  • To drive supplier quality resolution through SCAR and audits
  • To conduct material purge and dispositions
  • To follow up on Supplier Process Changes including evaluation and approvals
  • To support IQC on material inspection plan
  • To assist IQC on verification and dispositions of materials
  • To set up inspection plan for improvements
  • To drive supplier performance improvement

Requirements:

  • Degree in Mechanical Engineering or equivalent
  • 4-6 years working experience preferably in Plastic Injection Molding industry
  • In-depth knowledge of Plastic Mechanical components/parts
  • Knowledge of tooling design and parameters presses would be an added advantage

Permohonan melalui http://adf.ly/DPsUI

A Future without boundaries… It’s been said that with the right level and the right place to stand, you can move the world. We’ll give you both.

Tarikh Tutup Permohonan: 14/10/2012

Tags: , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: